References

  • Belt type: Betahete

    Until Dunlop Betahete was installed this customer was experiencing very short average belt life of only 6 to 12 months due to poor resistance to heat.

    Industry: Steel (Metallurgical works)    Location: Russia    read more
  • Belt type: BV – VT (EP Carcass)

    Hot sulphur is pelletized from molten sulphur and the pellets come out from the pelletizing units in a wet condition. The water contains medium/low concentrations of sulphuric and sulphurous acid....

    Industry: Oil & Gas, sulphur handling    Location: Middle East    read more
  • Belt type: Dunlopipe TC 630/3 RA 6+3 1000 mm wide

    This extremely price sensitive customer states that Dunlop has supplied the best pipe conveyor belt ever for one of his most critical installations, which conveys phosphate powder to a silo with KOCH...

    Industry: Mining (phosphate)    Location: Middle East    read more
  • Belt type: EE SM 400/3 ROM

    Because of the unacceptably short working life of a competitor belt experienced on identical applications in other power plants the contractor installed a Dunlop 400/3 ROM belt in this location more...

    Industry: Energy. Power station    Location: Eastern Europe    read more
  • Belt type: Ferroflex 500 / 800mm Wide 5+4mm DHTE

    This is a critical conveyor on the site as any stoppage caused production to be lost. Competitor’s belts were failing extremely quickly due to the heat. Covers were cracking and belts delaminating....

    Industry: Quarrying    Location: UK    read more
  • Belt type: Ferroflex Deltahete SW 800/1 - elevator

    This customer was using our competitor's belts and was experiencing serious delivery issues. The availability of Dunlop Ferroflex was superior by far. The first belts supplied by Dunlop are still in...

    Industry: Mining    Location: Africa    read more
  • Belt type: Ferroflex 2000/1 8+4V*1000 RA (FES)

    1.8km long line carrying limestone from the quarry to feed the cement production plant. This belt has run continuously and virtually problem-free for the past 18 years.

    Industry: Cement    Location: Egypt    read more
  • Belt type: Multiprof (SU 500/4 RA 3+2 800/7)

    The primary reason for changing to Dunlop Multiprof was due to problems with conventional belts during the winter. Frozen wooden chips were sliding down the surface of the belt. In spite of severe...

    Industry: Wood, paper & pulp    Location: Russia    read more
  • Belt type: Superfort 7 EP 350 RS Abrasion resistant

    After a thorough investigation and analysis of this customer’s needs the RS cover grade was selected resulting in improved operational performance and longer life.

    Industry: Iron ore mining    Location: South America    read more
  • Belt type: Superfort 400/3 4+2 ROM oil/fat resistant

    Dunlop oil resistant (ROM) belts were installed when the plant was first built. The site maintenance engineers report that a number of the original belts have now been running for approximately 25...

    Industry: Transhipment (Import/Export terminal)    Location: UK    read more
  • Belt type: Superfort 400/3 4+2 ROS oil/fat resistant

    Operating conditions for this conveyor include high temperatures (130-140 ºC) and a high oil percentage content in the olive waste of approximately 20%. The conveyor is working 15-16 hours per day....

    Industry: Energy (Power Plant)    Location: Spain    read more
  • Belt type: Superfort 400/3 4+2 ROS oil/fat resistant

    This recycling plant had tested several belts supplied by a number of different manufacturers. The results were extremely poor. Six months ago the local Dunlop distributor installed 400/3 4+2 ROS...

    Industry: Recycling    Location: Poland    read more
  • Belt type: Superfort 500/3 5+2 Deltahete heat resistant

    Despite trying belts from a number of different suppliers, the user was experiencing a very short average belt life of only 4 to 5 months. The successful introduction of Deltahete proved to be the...

    Industry: Cement    Location: Spain    read more
  • Belt type: Superfort 500/3 5+2 Deltahete heat resistant

    The site maintenance managers responsible for the conveyor systems believed that they were getting the best possible performance purely because of the reputation of the Goodyear brand. However, they...

    Industry: Steel    Location: South America    read more
  • Belt type: Superfort 800/4 4+2 RA Abrasion resistant

    More than 15,000 square metres of Superfort abrasion resistant belting was originally supplied and installed in this power plant in 1986. 2000 metres was replaced in 2005 with a further 400 metres...

    Industry: Energy (coal fired power plant)    Location: Netherlands    read more
  • Belt type: Superfort 1000/4 6+3 BVXS fire resistant 2200mm

    Since installing Dunlop BVXS belt two years ago the operating life has clearly improved while the maintenance costs have reduced significantly. The thicker skim of the BVXS assisted with an improved...

    Industry: Transhipment (coal)    Location: Europe    read more
  • Belt type: Trioflex 630 6+2 RS abrasion resistant

    The previous average belt lifetime of the SIG belt was usually 2 to 3 months, which meant that the belt was being replaced 4 times or more each year. We introduced Trioflex on this problem conveyor...

    Industry: Steel    Location: Spain    read more
  • Belt type: Trioflex 800 8+3 RS abrasion resistant

    The previous average belt lifetime was 3 to 6 months but in the previous year the belt had been replaced 4 times. We introduced Trioflex with a higher tensile strength. The belt has now been running...

    Industry: Quarry    Location: Southern Europe    read more
  • Belt type: UsFlex 630/1 6+3 RS

    The multi-ply belts previously being used were regularly being ripped along the skirting area. The ore type being carried is very sharp quartz type rock that was becoming jammed along the bottom of...

    Industry: Mining    Location: Africa    read more
  • Belt type: UsFlex 630/1 6+3 RS

    Customer needed to replace conventional multiply belt 6 times per year on average. Belts were being ripped and torn by sharp pieces of metal. After fitting Dunlop UsFlex 630/1 the belt has lasted...

    Industry: Steel    Location: Germany    read more
  • Belt type: UsFlex 630/1 6+3 RS

    This quarry has some of the hardest and most abrasive rock in the country. The machine arrived following a 12-month trial period in another quarry and was then put to work at this site. The belt had...

    Industry: Quarry    Location: Ireland    read more
  • Belt type: UsFlex 630/1 6+3 RS

    The previous average lifetime of belts on this conveyor was less than 5 months. Although the customer felt that this was an acceptable operational lifespan, the local Dunlop distributor persuaded...

    Industry: Quarry    Location: Italy    read more
  • Belt type: UsFlex 1000/2 8+3 RS

    The customer had tried several belts over the years including EP 630/4 6+2 and DLP 630 6+3. Belts were being prematurely destroyed due to tears and ripping. Following our advice, they changed to...

    Industry: Wood, paper & pulp    Location: Scandinavia    read more
  • Belt type: UsFlex 1000/2 8+3 RS

    Ships carrying bluestone are off-loaded at high speed 3 times per month at very high belt speed. When not used for ship unloading the conveyor is operated at normal speed to transport granite rock...

    Industry: Quarry    Location: Netherlands    read more
  • Belt type: UsFlex 1000/2 8+3 Z RS

    Belts were lasting approx 3-4 months on C1 primary jaw crusher conveyor on site. Customer had tried belts from various manufacturers and some failed even earlier due to the severe working conditions...

    Industry: Quarry    Location: Scotland, UK    read more